Even when you drive a tough and reliable vehicle like a Land Rover model, it’s important to remember that things can go wrong. For example, you just never know when a sharp piece of debris may end up in the road directly in front of one of your tires. If you ever do get a flat, the Land Rover service center at Land Rover Jacksonville wants you to be prepared with this step-by-step guide.
Find Your Tools
Hopefully you never go anywhere without the right tools to change a tire. These include a jack, lug wrench, and a spare tire. Optional tools that are helpful include wheel blocks and portable caution signs.
Loosen the Lug Nuts and Raise the Car
The next step is to loosen the lug nuts on the flat tire with the wrench. Don’t, however, take them off completely. Then put the jack under a sturdy part of the car’s frame and turn the handle clockwise to get it about six inches off the ground.
Swap the Tires and Lower the Car
Next, remove the lug nuts and take off the flat tire. Line up the spare tire with the wheel and put it in place, then replace the lug nuts. Finally, turn the jack handle counter-clockwise until the car is lowered. Before driving away, tighten the lug nuts completely.
Get Land Rover Tire Service in Jacksonville, FL
While you’ll be good to go with your spare on, you still have one last step to take. To be prepared again in the future, it’s important to get tire service at Land Rover Jacksonville. Contact us and we will make sure you get the correct tire for your vehicle. Avoid a roadside emergency with our help!